need some help

[ChronoDisc]

im trying to do a dye on one of my discs.... how should i go about doing it?
and which disc could i do it on.

star eagle
dx dragon
dx destroyer
dx gazelle
dx teebird

[sgb118]

That star plastic would be the best to dye. If you have never dyed before, I wouldn't dye a disc you like though... So if you like your eagle, wait until you get some under your belt.

[English101]

It's darn near impossible to dye dx plastic. Stick with champ / z and star/ esp if you can.

[solomon.trenton]

to try your hand at it first though try dx. you will have to keep the disc in the dye longer.

[Ball-Z]

[QUOTE=ChronoDisc;64504]im trying to do a dye on one of my discs.... how should i go about doing it?
and which disc could i do it on.

First, use sign vinyl.
If you have no vinyl, place another strip of masking tape on top of any tape to tape joints. It WILL bleed through.
Second, heat the dye up till its is about to boil, let it cool till you can touch the bottom of the pan and not get burned. Then, put the disc in and let it soak and put the pan on the already warmed up (but turned off) burner.
Let soak about 15 min
Take disc out and repeat
Rinse with warm water, remove mask, and enjoy!