PVC disc storage

[apdrvya]

Originally Posted by iacas

Is the bottom for bags, or will you stack them on top of each other down there? Or is the gap narrow enough that they won't hit the floor and not rest on the "rails" on that bottom layer?

What are the dimensions?

Same dimensions as previously.
5" stretchers
10" risers
but 48" shelves
and 5" half shelf on top

they are spaced to "float" the disc they won't hit the floor. please refer to earlier posts to see my original rack

[apdrvya]

stocked! bottom two are usdgc's, 3rd is dx and kc pro, top is chings and se...

[apdrvya]

reposting, this is what my racks look like today

[Scared_Discless]

^ that's a manly rack you've got there Jeff.

and +1000 interwebz for the Diet Mt Dew.

[apdrvya]

diet mt dew is like crack for a crackhead

[chambers]

Now all you need is a sheet of clear plastic to put over the whole thing to keep the dust out!

The bottom rack is all Rocs? Jeebus


____________________________________

[apdrvya]

yes, all rocs.
doesn't include the 8 on my wall or the 3 in my bag

[E3D4523]

Here is the storage rack I built. Much better than a cardboard box.

[apdrvya]

^very much so.

[iacas]

Originally Posted by E3D4523

Here is the storage rack I built. Much better than a cardboard box.

All dimensions are the dimensions of the cut PVC pipes and don't include the additional space of the fittings:

1" PVC.
12" between the two shelves.
6" deep.
6" on the bottom and top.
36" wide.

I'm going to try to find some 1 1/4" x 1 1/4" x 1" fittings to slide on the top rack to serve as sliding spacers or stands. I bet with a rubber band or something they'll slide where I want and stay there. As you can see I don't have enough discs to just pile them up across the whole thing, so that's the current leader for possible solutions. As an alternative I could just drill a bunch of holes and thread some thin rope through every inch or so. That might be okay as well.