I have a plotter and i'm not afraid to use it.

[Dj1001]

Hey guys whats up. I recently obtained a commercial grade plotter with some really good software and I'm looking to get a return on my investment.

I offer the services of cleaning/vectoring images as well as cutting the vinyl with my plotter and mailing it to you for you to dye yourself.

base prices are 8 dollars shipping included for 2 cuts of the image if only basic cleaning is needed.

additional images and more extensive photo editing cost extra, my rates are extremely reasonable.

I use either ORACAL 641/651 or avery intermidiate vinyl depending on what I have at the time. Colors will vary (usually white or grey) I also use high quality clear transfer media that is very easy to work with.

PM me if interested, I'll post dyes that people have used my stencils for in this thread as they come in.

Also interested in BLizzard Bosses,wraiths and destroyers.

[Dj1001]

Recent dyes from Dyeingtoplay

Originally Posted by DyeingToPlay

glow champ valk.... slightly off center, and a big bleed at the top, but overall happy with it as a backup for my main driver. Thanks to Dj1001 for cutting the vinyl for me

Originally Posted by DyeingToPlay

another evening project here on a med ion

[Dj1001]

Originally Posted by DyeingToPlay

One more for the bag/backup. Thanks again to Dj1001 for his vinyl cutting service. Med UV Blue Ion.

All of my vinyl was lost in a basement flood, luckily the computer and plotter were unharmed, should be back up and running in a week or two, on a good note I am working with Justin and communitydiscs.com to get my stencils available on his site, stay tuned for more info.

[NumSkul]

Originally Posted by Dj1001

All of my vinyl was lost in a basement flood, luckily the computer and plotter were unharmed, should be back up and running in a week or two, on a good note I am working with Justin and communitydiscs.com to get my stencils available on his site, stay tuned for more info.

Great guy! Excellence customer service always. Ill keep an eye on this.

[Dj1001]

have some new vinyl on the way and assuming the plotter and computer are fine I should be up a running by the end of this week.

In the meantime check out the banner I did for Justin @ http://communitydiscs.com/

[Dj1001]

Banner for Justin's site is up. check it out http://communitydiscs.com/

I also have a pretty big order of vinyl that should be here next wednesday.

As always PM me if interested.

[Dj1001]

Bump to the Top

[Dj1001]

Everything is up and running at full capacity. I have plenty of vinyl on stock, Ready to complete your orders.

[Dj1001]

Just made a Deal with Justin @ http://communitydiscs.com/
look for the decals to be available on his site and in your packages in the near future

[justin]

I just decided to search ffor "CommunityDiscs.com" and found this thread. Darrin, let me know when you want to get some stencils on there. I can put them on my site and just paypal you the money and you can ship them...if you think that might be the simplest way to go. Let me know what you think.

And thanks Ian. You're the greatest.