Dynamic Discs Making Their Own

[keltik]

does DD still sell super puppies?

[scarpfish]

Originally Posted by pspunch

Dynamic Discs Floater 200.0 27.5 3.6 2.0 26.3 0.6 7.3 106.50 4.88 S V 184.3 79-01 01/01/79
Dynamic Discs Jeteye 180.1 21.7 1.7 1.1 20.0 0.8 5.1 49.50 9.41 89-04 01/01/89
Dynamic Discs Long Ranger 180.1 21.7 1.7 1.1 20.0 0.8 5.1 49.50 9.41 89-03 01/01/89
Dynamic Discs Puppy 174.3 21.0 2.5 1.8 19.8 0.6 8.6 75.00 7.60 V 140.7 80-01 01/01/80
Dynamic Discs Super Puppy 174.3 21.0 2.5 1.8 19.8 0.6 8.6 75.00 7.60 V 140.7 80-02 01/01/80

this is from the pdga approved pdf... these show approval dates from the 80s tho.

That was an entirely different company.

Originally Posted by bradharris

That said, it seems pretty likely that Discraft is actually doing the molding of these discs.

I'm told from some inside sources that is not the case.

[MrFixIt]

Originally Posted by ManU

if DGR were dead it would be rolling over in its grave

So the rumors aren't true?!?

[bradharris]

Originally Posted by scarpfish

I'm told from some inside sources that is not the case.

Intriguing....

[bcr123psu]

Originally Posted by GameDayTested

Fair enough. Still seems more likely than straight competition. If they couldn't/wouldn't sell other brands, they'd lose money on discs and dyes since there are only 5 molds now. This way also, Eric McCabe could "leave" discraft and still have relations with them.

Those 5 molds are ancient and they don't sell them anymore. I believe that the new mold(s) is(are) shrouded in secrecy...for now.

Originally Posted by Giv'r

Wouldn't it be more like what Discraft already does for DGA?

Like scarpfish said, I've also heard otherwise.

[scarpfish]

The font on those flight ratings in the picture should be a hint fellas.

[ZAMson]

Originally Posted by bradharris

Intriguing....

Inside sources say that I've posted the facts like 10 times because I think it's funny how only a few ppl believe I know wtf I'm talking about and I wanna lay down a dense layer of quotable future-telling

No clue about the Pros (0% care what happens there) but more discs and more sub-brands are probably a positive thing for the DG market. Interested to see where DD takes this. (their 4 Lat64 molds)

Originally Posted by scarpfish

The font on those flight ratings in the picture should be a hint fellas.

Lat64 making 4 molds for DD should be a hint

[bcr123psu]

Originally Posted by scarpfish

The font on those flight ratings in the picture should be a hint fellas.

We seem to have the same base knowledge, but I'm going to go ahead and disagree with you here. DGA uses the four characteristic flight ratings and they're molded by Discraft.

[heartman]

Originally Posted by scarpfish

The font on those flight ratings in the picture should be a hint fellas.

Lat. 64?!?!?!?!?!?!?!?!?!?!?!?!

[throwfromthewoods]

Derr..I think people read selectively on here. Latitude wants to get into the US market better. Emac is carrying Latitude molds. I don't say anything because I don't "know" anything, nor do I have any insider info. But it seemed like a pretty obvious logical jump to me.