| rarintal |
04-24-2014 03:50 PM |
Alright! sorry i have been gone for a couple of days!
Quote:
Originally Posted by Mr. Butlertron
(Post 2430185)
My last question was passed over so I'll be more blunt and direct. I have one Discmania disc (s-pd @ 158) that's great, which makes me want to try more 150-159 discs. The problem is that there is barely anything of that weight on the market. I would know, I look daily. Officially, what molds DO you make this low? Will you release enough light weight disc molds to fill a bag???
|
Ok, I have found the answer to this. We make the following in the 150 class: Blizzard DD2
Blizzard PD2
Lady Line FD
Lady Line MD2
Lady Line P1
S-LINE PD
S-LINE TD
S-LINE TD2
D-LINE P1
D-LINE TD
D-LINE MD2
D-LINE FD
Sorry it took so long to answer!
Quote:
Originally Posted by fasteddie
(Post 2431318)
I can quite figure out how to join the group there onemilemore, but I'd like to join.
I've got another question rarintal!
I have two P PDs that are unique. I believe they are from an early run (I've had them for a couple years). They are flat as a board ZERO DOME (as flat as pro rhynos, and FAF firebirds, they look exactly like OOP 2004 flat pearl orcs.) and they are SUPER gummy, 167 g. I've never been able to find anymore of these bad boys.
All other P PDs I've found have been stiff and look like a normal PD (slight dome).
Any info on these? was is a mistake? re tooling? limited run? I've had them in my bag long enough to worry about replacements when the time comes, it's the only disc that I don't have at least five back ups.
Any other discmaniacs seen or have some of these?
|
From my knowledge they are not a mistake, It may have been an older type of P-LINE/PRO material. The newest ones that i have taken a look at are pretty flat but really hard material.
Quote:
Originally Posted by fasteddie
(Post 2431320)
you guys over there at discmania don't have a box of these hanging around in storage by chance?
|
Not to my knowledge but we will keep this in mind to keep a look out for these in the future.
Quote:
Originally Posted by pnasalberta
(Post 2431833)
When the new md3 comes out will it be made in a stiff p line plastic? I think it should.
|
I can't answer this question, I will seek out an answer so we can give you the right answer.
Quote:
Originally Posted by Rol6566
(Post 2431836)
Yea, a kcpro or dx md3 would be awesome. Cycle like rocs
|
A lot of people seem to be asking for these. We will keep this in mind for the future
Quote:
Originally Posted by Shocker
(Post 2432153)
Will you guys be stocking anymore lighter S-FD's soon?? There is only 1 left at 172 at the rest at 175. I personally like 166-169g, but would take a 170 if it's my only option. Thanks in advance!
|
We will be doing a restock sometime in the soon future. We will keep these in mind.
Quote:
Originally Posted by DirtyMeathook
(Post 2432319)
This is you being blunt and direct? You take a whole paragraph to ask:
What molds do you make in 150 class?
|
seen answer above :)
Quote:
Originally Posted by whentherainscome
(Post 2432554)
Will we see P-Line FD and FD2s? It is my favorite plastic. My go-to discs are P-PD, Pro Leopard and I just aced with a Nova I was trying out. I would be very interested in P-FD2s, more so than I am in the C/S/G plastics.
|
Thank you for the information. We are listening to you guys, and We will keep this in mind for the future.
Quote:
Originally Posted by onemilemore
(Post 2434100)
Please count this as my weekly check-in to see when G-Line FDs are coming. :D
|
We are working at getting these available. Thank you for the Insight for what the Discmaniacs out there want on our shelves!
Quote:
Originally Posted by onemilemore
(Post 2434328)
You're probably right, but I'd love to see Innova give out some Discmania love sooner via G-Line. With 22 Innova molds getting the special blend already, you'd think they could take a little time to get the Discmania stuff moving.
|
I assure you it is coming! and we are working on getting it available.
Quote:
Originally Posted by Jozzz
(Post 2434145)
Probably after the DITG tour ends would be my guess.
|
Maybe, could be sooner ;) |
