Disc Golf Course Review

Disc Golf Course Review (https://www.dgcoursereview.com/forums/index.php)
-   Discs (https://www.dgcoursereview.com/forums/forumdisplay.php?f=51)
-   -   Official Ask Discmania Thread (https://www.dgcoursereview.com/forums/showthread.php?t=103883)

rarintal 04-03-2014 05:06 PM

Quote:

Originally Posted by Peter S (Post 2407905)
Any official word on a Discmania or Innova backpack? If not I wonder why Discmania/Innova has not jumped on the backpack bandwagon.

Love the Freak & Gremlin. Thank you for bring the Gremlin back from the dead. Tried every Roc & strange bee like creature there is & still love me some Gremlin.

In my bag 175 D-line Gremlin (dead straight) 176 s-line Gremlin (hyzer)
worn S-line Freak (dead straight)
new C-line PD Freak. fear no wind or Wraith

thanks for the Discmania love. again keep an eye out for the social media for new products. and the GM is a very unique disc for sure!

rarintal 04-03-2014 05:07 PM

Quote:

Originally Posted by 5QU166Y (Post 2407910)
Are there any plans to make C-P2s? I asked a few months ago, and I didn't get a definite response.

There are some available on the Hero website. I will keep this in mind the future.

rarintal 04-03-2014 05:09 PM

Quote:

Originally Posted by elmexdela (Post 2408005)
OP you dead?

alive and well... Just extremely busy getting this store open ASAP for all of the Discmaniacs out there!

rarintal 04-03-2014 05:13 PM

Quote:

Originally Posted by tbird888 (Post 2408041)
This is a great question. I would really love some softer P-Lines that are more overstable than the current stiffies.

I will keep this in mind. thank you for the insight! :)

rarintal 04-03-2014 05:15 PM

Quote:

Originally Posted by JTacoma03 (Post 2408232)
Rumor has it you're a Russian with tremendous umbrella holding skills. Confirm or deny?

well, I am not sure if you nailed the heritage... but I have been known to get out from behind this desk and hold an umbrella like no one has seen before! ;)

rarintal 04-03-2014 05:17 PM

Quote:

Originally Posted by turbosteve (Post 2408560)
I noticed recently on instagram that representatives for the disc golf park concept were at a trade show in Moscow. Was this successful? Are there any plans to bring the disc golf park concept to North America or Asia?

I will most definitely get back to you on this. I do not have all of the information just yet :)

Jozzz 04-03-2014 05:17 PM

Have to disagree a bit on the Euro glow PDs being more overstable than the CFR PDs. While my sample size of 14 glows isn't a lot, they all have lower parting lines than the 20 or so CFRs I own.

rarintal 04-03-2014 05:18 PM

Quote:

Originally Posted by Spinthrift (Post 2408659)
While the official linkage is great, and I for one appreciate it, you have opened the door to a very large and active customer base.

If the commitment is to "once a week" that door is barely ajar, with it likely to be frustrating for some of those customers whose inquiries are buried, or for whom a "conversation" with you stretches over weeks.

Anyone who throws or is curious about DM will check this thread every time they are on site, most daily (or hourly :D).

I will be here as much as I can. Thank you very much for the input! I am here to answer your questions!

rarintal 04-03-2014 05:19 PM

Quote:

Originally Posted by fasteddie (Post 2408942)
THIS! I check for feedback and updates every single day. I have questions ranging back two years on their products... once a week seems very limited in scope, considering we've already got three pages in two days. I'm curious if they will be able to answer that volume with the current once a week replies, I suppose there will be quite the delay in response as the thread grows.

I'm sorry that happened to you! I will try to stay on top of this forum as much as I can!

rarintal 04-03-2014 05:20 PM

Quote:

Originally Posted by niuvalleycane (Post 2409306)
a bud gave me a C PD with a wiped stamp, rim seems slanted, innova tooling, but no patent numbers, is it a plus rim for sure?

I cannot say for sure without seeing the disc. but if you hold a non-plus mold rim and a plus mold you will be able to tell the difference.


All times are GMT -4. The time now is 08:53 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2021, vBulletin Solutions, Inc.