Disc Golf Course Review

Disc Golf Course Review (https://www.dgcoursereview.com/forums/index.php)
-   Course Maint. & Equipment (https://www.dgcoursereview.com/forums/forumdisplay.php?f=24)
-   -   Rubber Tee Pads (https://www.dgcoursereview.com/forums/showthread.php?t=40025)

Dahlemj24 07-14-2011 05:11 PM

Rubber Tee Pads
 
So I'm going to be installing rubber tee pads that are 3/8" thick. What is the best way to cut them? Will an box cutter be enough or should I get something else?

De Hermit 07-14-2011 06:08 PM

I would believe so. Least likely to tear up the edges. May require a few passes on each side though.

Dadio 07-14-2011 06:13 PM

Have plenty of blades, I bet they'll dull quick

optidiscic 07-14-2011 06:19 PM

use a tree saw......box cutter wont penetrate it
Tree Saw was the only blade tough/sharp enough to cut my fly pads

three57magnum 07-14-2011 06:58 PM

I have done it with a box cutter on 3/8" rubber. It does take a few passes. Remember a straight edge of some sort.

Dahlemj24 07-14-2011 07:24 PM

I will make sure to have both on hand.


All times are GMT -4. The time now is 04:52 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.