| Discmania_Support |
07-13-2017 02:47 PM |
Discmania Support Reply
Quote:
Originally Posted by Flick Maniac
(Post 3201359)
Thats right. I was kind of expecting the s-line release before a new mold, but alas the TDx happened. Not that it is a bad thing :) just didnt forsee it
|
The TDx is here! These things are awesome. There are definitely more stock releases on the horizon but most of which won't happen until next year, starting with the PDx of course.
Quote:
Originally Posted by Pethor
(Post 3201261)
Another S-Line question. I know s line CD3s were in the mystery boxes, when will they get a general release?
|
S-Line CD3 will be available around the fall. Keep an eye out for those, we are very excited to get more of them into players' hands. We have been especially excited for this release and have gotten very positive feedback on the S-Line ones.
Quote:
Originally Posted by Strauss
(Post 3200197)
Also keeping my fingers crossed for more S-line FD3's!
|
Swirl FD3 will return. As far as the stock versions go, those won't be made for a little while.
Quote:
Originally Posted by New013
(Post 3200090)
if you mean more of that KCPro like run then yes that needs to happen again repeatedly until the end of time.
|
P-MD3 is on the list for production and they will return! You will see advertisement about those pop up when the time comes. It has been too long and we want them back just as badly as you do.
Quote:
Originally Posted by B The V
(Post 3200042)
P line md3 needs to happen soon please!!!!
|
P-MD3 is on the list for production and they will return! You will see advertisement about those pop up when the time comes. It has been too long and we want them back just as badly as you do.
Quote:
Originally Posted by Pethor
(Post 3199385)
Will the FD3 be available in S-line soon?
|
FD3 will return in the Swirl plastic very soon. Give it about a month or so and they will be back.
Quote:
Originally Posted by ferretdance03
(Post 3198510)
P1X- will there be another stock release in P line?
|
These are about to be made as well. The P-P1x will return!
Quote:
Originally Posted by Flick Maniac
(Post 3198291)
Can you confirm if the Made in U.S.A. tooling denotes a 10th run PD and does it identify any other runs of other molds too?
|
Most likely yes. I know that the newest runs have that tooling as well but all of the previous ones other than 10th do not have the US tooling. |
