| Discmania_Support |
04-26-2017 10:46 AM |
Discmania Support Reply
Quote:
Originally Posted by Jenga54
(Post 3168151)
How do the P1, MD, FD, TD, TD2 round out for you? Without a ton of speed the drivers north of speed 10 would likely just cause more harm than good. I expect these 5 discs could carry a person through a whole round.
|
Right you are. For the most part, the general public is not able to throw the faster discs to the full capacity that they are meant for. A smart choice is going with things that are similar to the molds that you have listed above. I would recommend adding a PD, CD2, or our new CD3 to that mix (doesn’t need to be all of them) and you will be set.
Quote:
Originally Posted by DanJon
(Post 3168143)
TDx is supposed to be coming out soon.
|
As many of you know, the TDx is now approved and will be a great disc for all of our Discmaniacs out there!
Quote:
Originally Posted by maskedavenger
(Post 3168063)
Color coded people are funny :) But I sure have my own funnities too. Black G-PD should be available in European Masters fundraisers that I see pop up every once in a while in Finland, but not sure about the US market.
|
We did have some of the European Masters ones last year but all of those got placed in Mystery boxes so we have none left in the US anymore. At least for our store, that is. I am sure many of the collectors out there have a few of them.
Quote:
Originally Posted by smarkquart
(Post 3167786)
I know they did a test run with GStar Bosses, so I know the possibility is out there even though I am also assuming that no other molds were given this treatment. I want them because my main set-up is trying to be filled with white discs with black being the secondary color. When I was throwing mainly trilogy, this did not seem to be a problem, but now I am leaning heavily toward Discmania, at least for the drivers. I already have two black G-DDs, but I could not even find a black G-PD.
My secondary bag is all yellow, so I am already covered in regards to G-Line.
|
White is scarce in G-Line. We have seen a few of those white G-Star Bosses pop up and maybe another mold or two at some point but we have never had a single white one here to sell at Discmania of any mold produced. Black is a little more common, but not by much. We stick to most of the primary colors and those end up being the majority of colors that everyone knows of anyway. Black in general is a harder color to come by. Though it can be made, it is a bigger risk to take when it comes to production meaning that no one wants to get stuck with too many of a dark color when the majority of the market prefers brighter colors for ease of play. Though black is a special color, it is obviously hard to find and most players won’t end up buying them. Putters will be mainly the only ones produced in black most of the time.
Quote:
Originally Posted by maskedavenger
(Post 3167635)
Not sure if white G-line exists...
|
See the comment above.
Quote:
Originally Posted by Dustinms32
(Post 3167527)
I'm also curious on the time table regarding normal production CD3s
Sent from my SM-G920R4 using Tapatalk
|
CD3 is coming soon very soon.
Quote:
Originally Posted by smarkquart
(Post 3167509)
I have really become attached to my G-DDs and G-PDs, I would be more than appreciative if there was a way to find white into my hands.
|
White unfortunately is quite the rarity and we have only seen a few molds be produced in white with very low quantities. Though we have seen them before, not a single disc has passed through our facilities and has been white. We will keep searching….
Quote:
Originally Posted by tylerc
(Post 3167453)
Confirmed, the new run of s-line pd2 is really nice
|
We are glad you like them!! This run is fantastic and we are surprised that we haven’t sold out of all of them immediately. Get some more while you can!! |
