Disc Golf Course Review

Disc Golf Course Review (https://www.dgcoursereview.com/forums/index.php)
-   Discs (https://www.dgcoursereview.com/forums/forumdisplay.php?f=51)
-   -   Official Ask Discmania Thread (https://www.dgcoursereview.com/forums/showthread.php?t=103883)

seedlings 08-04-2022 10:33 AM

Quote:

Originally Posted by ArtemisClydFr0g (Post 3827771)
I had an S-line P1 that was penned *A or *AV on the bottom, so it was indeed the same mold

Ok, thanks. I wonít like it then. Donít care for the Aviar.

wims 08-04-2022 12:33 PM

The P2 is basically a blunt nosed Aviar. A beadless Aviar-X

DiscT 08-04-2022 12:55 PM

Quote:

Originally Posted by wims (Post 3827826)
The P2 is basically a blunt nosed Aviar. A beadless Aviar-X

Donít you mean beardless?

@CD- 08-04-2022 01:16 PM

Quote:

Originally Posted by krooster (Post 3827711)
People say the original P1 is just an Aviar but I don't buy that. It flies less overstable at low speeds in my experience. More neutral for my weak putts haha. If anyone has evidence that it's just an Aviar I would be interested to see it.

It feels pretty similar in the hand to an Aviar or a slightly less deep P2.

Quote:

Originally Posted by ArtemisClydFr0g (Post 3827771)
I had an S-line P1 that was penned *A or *AV on the bottom, so it was indeed the same mold

My impression is that it was the Classic Aviar in a couple other plastics. I really don't know if a different top is used for the DX Classic but it does fly straighter compared to the DX P&A as krooster described.

krooster 08-04-2022 02:18 PM

Quote:

Originally Posted by @CD- (Post 3827851)
My impression is that it was the Classic Aviar in a couple other plastics. I really don't know if a different top is used for the DX Classic but it does fly straighter compared to the DX P&A as krooster described.

The P1 is also straighter than any Classic Aviar I have thrown, but I have only thrown 2 different runs of Classic Aviar. One pretty flat, one more domey from a few years later.

That said, I did try a P1 in hard P-line once, and it was more overstable than D-line. And the Classic Aviar plastic is pretty hard. I could be convinced the the D-line P1 is how a Classic Aviar would fly if it were produced in softer plastic.

B The V 08-08-2022 07:18 AM

Sounds as if this may be a redesigned disc and not the same as the previous Innova made P1.

fishballer06 08-09-2022 11:26 AM

I saw some team guys have gotten their hands on a RC3. Any hints as to when we will see those?

seedlings 08-09-2022 01:04 PM

Quote:

Originally Posted by fishballer06 (Post 3828846)
I saw some team guys have gotten their hands on a RC3. Any hints as to when we will see those?

I hope they retool the Razor Claw just a bit shallower.

Also, can we get Origin in hard base plastic? I want something more understable than NEO or EXO Soft has beaten into. I could go with a Genius, but rather not add another mold.

Discmania: the new FD3 is fantastic, thank you! Also, any hints if the new Cloudbreaker is retool more or less stable? (Why retool to the exact same?) Is the special S-line very different from CB3 plastic?

Flick Maniac 08-10-2022 12:17 PM

Numerous reports seem to suggest the Cloudbreaker is less stable than the previous offerings. Should bomb for a lot of people. :clap:

seedlings 08-10-2022 01:25 PM

Quote:

Originally Posted by Flick Maniac (Post 3829131)
Numerous reports seem to suggest the Cloudbreaker is less stable than the previous offerings. Should bomb for a lot of people. :clap:

Canít wait to see more demos of CB1v2.

I was able to compare the new P1 in store. Arguably exact same height as the Rainmaker. Same top shoulder. Virtually same wing height, but very slightly rounded going down toward the wing. Very slightly less angle on the wing of the P1.


All times are GMT -4. The time now is 04:40 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2022, vBulletin Solutions, Inc.