Disc Golf Course Review - [Discmania] Official Ask Discmania Thread

Disc Golf Course Review (https://www.dgcoursereview.com/forums/index.php)

- Discs (https://www.dgcoursereview.com/forums/forumdisplay.php?f=51)

- -

Official Ask Discmania Thread (https://www.dgcoursereview.com/forums/showthread.php?t=103883)

Discmania Support Reply

[QUOTE=MNputterGUY;3433833]

Quote:

Originally Posted by Discmania_Support (Post 3433397)

It's certainly on the radar and has been for a little while now. I don't think it will happen this year. We'll see if we can pull some strings, though

Idk if it needs to be stiff p line like those md4s but I wouldn't mind a few driver pro p3xs

Quote:

Originally Posted by Jenga54 (Post 3434998)

Soo fingers crossed 🤞
Complete Active Line - says April/May. Thought it said March??
April: Instinct!!!!!!!!! (OS version of FD2(teebird?))
May: Method!!! (OS MD3, beaded (between md3/4))
June: Link!!!! (Please 4/2/0/4 maybe??)
July: Enigma (what is the Gap? Replace DD? Or like a shryke DD2 replacement?)
SLine FD2 (is it May/June yet!?!?!?!)
DD3 April. Likely Swirly SLine for Tour Fundraiser to rake in the dollars for Eagle. Is it going to be the same stamp?? I hope not so the first run has a unique stamp.
Then the SLine release DD3 once the swirly sells out.

So basically by July I'll have everything I need except Lux Instinct and Lux Link if it's an OS beast of a flat fast un-beaded putter

2019 is going to be a whopper of a year. We expect everything that has been made and will be made to be a huge success for players moving forward. DD3, FD2, Instinct (almost time), Method is fantastic, Link is in the process, Enigma should pair nicely with a DD3 though some players may choose one or the other.

DD3 next run will have the same stamp but the main indicator between the two is the First Run was all embossed with prototype lettering. That should do the trick.

On top of all that, we still have numerous Signature runs planned and specialty discs always on the horizon. I'd say even though #yearofevolution is in effect, #yearoftheshield seems to be a much longer year than we thought. Perhaps an eternity :)

I figure this is outside of typical customer communication, but can you tell us what mold pieces make up the 2019 FD2? In the dedicated thread on here, one user pointed out that it has the same tooling on the flight plate as the teebird3. The bottom wing looks like a TL to me - I'm wondering if maybe it's a TB3 top with a spacer and a TL bottom.

The bottom and the wing are different things, there's 3 parts to a mold

Quote:

Originally Posted by Jenga54 (Post 3436610)

The bottom and the wing are different things, there's 3 parts to a mold

Quote:

Originally Posted by Dave Walters (Post 971632)

http://i120.photobucket.com/albums/o...withlabels.jpg

....

Any chance we can get an update on this?
Also, I don't know how I'll replace my DD.
And no, the DD3 isn't the answer. Maybe some special run high $$ PD2 but I can't grip PD2. I need 10-11 speed, headwind dependable that doesn't fade and skip like a PD. And my CD and DD are gone :(
https://i.imgur.com/tyoIrcl.jpg

Plenty of time to stock up on a few replacements. I found quite a few places have s and c line dd's still available. I stocked up when the swirly version came out. I found some older run CD's with the craze stamp at our local shop so those are still available too. It sucks two of your molds are leaving and you can either try to stock up now until you find a replacement or just hope you don't lose any of what you do have.

SIAP, but is the Active line all new molds, or are they Yikun molds in new plastic?

Quote:

Originally Posted by Jenga54 (Post 3436995)

CD3 is a new favorite for me.

Quote:

Originally Posted by Gullikgul (Post 3437694)

CD3 is a new favorite for me.

Me too, I bag 2 of them as my main distance driver. But I'm not throwing them into a headwind with water all along the right side...