Old 10-21-2011, 12:54 PM
SirRaph's Avatar
SirRaph SirRaph is offline
Double Eagle Member
Join Date: Apr 2010
Location: Chicago
Courses Played: 74
Posts: 1,166
Niced 1 Time in 1 Post
Default Hot Stamping

I'm sure a few of us have killed 30 minutes browsing around to see what a hot stamping press would cost.

I might be taking the idea a little more seriously than some others, as I work at a machine shop, and have access to the equipment/people needed to machine stamps.

The only presses I've found that are within reason ($200-$300), don't look like they could take a mold. It looks like they're designed only to take type and dates.

Anyone found a manual press that's priced well enough for an amateur to consider buying?
Sponsored Links
Reply With Quote
Old 10-24-2011, 03:44 PM
Clempson13's Avatar
Clempson13 Clempson13 is offline
Eagle Member
Join Date: Jul 2011
Location: Greenville, SC
Years Playing: 8.7
Courses Played: 19
Throwing Style: RHBH
Posts: 558
Niced 0 Times in 0 Posts

i browsed around for this for about 30 minutes once. from what i could tell buying something used is the best way to go to get the equipment size you need without spending a whole lot. seemed to be a lot of stuff on ebay.
Reply With Quote
Old 12-08-2012, 04:37 PM
iacas's Avatar
iacas iacas is offline
Double Eagle Member
Join Date: Aug 2012
Location: Erie, PA
Years Playing: 7.4
Courses Played: 31
Throwing Style: RHBH
Posts: 1,737
Niced 3 Times in 3 Posts

I was going to post this same thread so I'm glad I found this one.

How much does a hot stamp cost? The foil seems relatively inexpensive. You'd want a hot stamp machine capable of stamping something about 7" in diameter or so, at least 6".

How much does creating a mold for the actual stamp cost? That is likely the cost prohibitive part, right?
Reply With Quote
Old 12-08-2012, 08:06 PM
tbird888's Avatar
tbird888 tbird888 is offline
Salient Disc Test Team
Join Date: May 2009
Location: Blue Ash, OH
Years Playing: 14.8
Courses Played: 214
Throwing Style: LHBH
Posts: 16,637
Niced 1,450 Times in 746 Posts

The foil looks like ~15 a roll on eBay.

The machines range in cost.
Reply With Quote
Old 12-08-2012, 08:29 PM
ZAMson's Avatar
ZAMson ZAMson is offline
^Has PhD in Disc-Artistry
Join Date: Nov 2010
Location: Slaughter Ln, Austin TX
Posts: 3,045
Niced 125 Times in 63 Posts

Golf dies = $65ish

Mini dies = $35ish
Reply With Quote
Old 12-08-2012, 09:22 PM
discdoh's Avatar
discdoh discdoh is offline
Birdie Member
Join Date: Mar 2011
Location: St. Louis, MO
Years Playing: 26.6
Courses Played: 4
Throwing Style: RHBH
Posts: 289
Niced 1 Time in 1 Post

Gateway charges $60 for a disc stamp and $30 for a mini stamp. I presently work there and spend a good amount of time on the hot stamper. There is a certain amount of loss that has to be counted in...you will burn through some x-outs getting the stamp centered and the design "dialed in". Every stamp is different and requires building up the press plate with masking tape in the right areas to make sure that it "hits" correctly and completely. You also have to manipulate the dwell time and heat settings to try to minimize burning it in too much. This is particulary tricky with baseline plastics. Certain types of foil only work with certain types of plastic, so you have to have a large variety of foil backings to work with as well. There truly is an art to stamping frisbees. It is not as simple as sticking the plate in and firing off a bunch of perfect discs...trust me! BTW, the plates are made from magnesium, which is a particulary volatile metal. You have to be extremely careful with the shavings created from drilling out the mounting holes. 2000 degree flare ups can be a bit exciting if you know what I mean!

Niced: (1)

Last edited by discdoh; 12-08-2012 at 09:26 PM.
Reply With Quote
Old 12-08-2012, 09:38 PM
iacas's Avatar
iacas iacas is offline
Double Eagle Member
Join Date: Aug 2012
Location: Erie, PA
Years Playing: 7.4
Courses Played: 31
Throwing Style: RHBH
Posts: 1,737
Niced 3 Times in 3 Posts

Thanks, discdoh. That is more than enough to scare me off pursuing this idea even as a "something to do" kind of hobby or distraction.
Reply With Quote
Old 02-06-2017, 02:49 PM
zenbot's Avatar
zenbot zenbot is offline
*Super Moderator*
Join Date: Jun 2008
Location: Ventura, California
Years Playing: 13.4
Courses Played: 31
Posts: 11,095
Niced 348 Times in 130 Posts

I think this company's descriptions of their specialty foils win the internet today.

Attached Images
File Type: png Bold Mosaic.png (117.9 KB, 191 views)

Last edited by zenbot; 02-08-2017 at 08:40 PM.
Reply With Quote

Old 11-02-2019, 11:53 AM
Danjstellmach Danjstellmach is offline
Join Date: Oct 2019
Location: St. cloud, MN
Posts: 2
Niced 1 Time in 1 Post

Any suggestions on what machine to purchase would be appreciated
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Stamping osborne General Disc Golf Chat 2 08-26-2015 04:40 PM
Custom Hot Foil Stamping: Introduction and individual custom orders Disc of Cheese Disc Dyeing 20 08-23-2015 02:55 PM
Hot Stamping Art and Science Harmonized w/Plasma VOLT! Aim For The Chains Discs 36 04-15-2015 03:04 AM
HOT!!! Hot orange + FLAG STAMP Big Bird RC3 @ 175g. pablo.diablo The Marketplace 0 01-14-2013 05:05 PM
Genuine Used Hot Stamping Foil zenbot Disc Dyeing 6 12-28-2009 02:03 PM

All times are GMT -4. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.