blazerico
Eagle Member
- Joined
- Aug 21, 2008
- Messages
- 555
https://www.flickr.com/photos/13440789@N07/20525015830/in/dateposted-public/
made mine for about $25 and it's paid for itself many times over. it's about four discs wide and I've pulled in three at a time. unseen sticks and branches can be a problem, so I didn't glue anything in place. that way, if it's stuck and I pull hard enough, the rods will spin a little and I can get it back. also, don't forget to drill holes in it so it can sink. adding lead weights on the inside helps with that too.
made mine for about $25 and it's paid for itself many times over. it's about four discs wide and I've pulled in three at a time. unseen sticks and branches can be a problem, so I didn't glue anything in place. that way, if it's stuck and I pull hard enough, the rods will spin a little and I can get it back. also, don't forget to drill holes in it so it can sink. adding lead weights on the inside helps with that too.