glassila
Double Eagle Member
- Joined
- Jun 30, 2013
- Messages
- 1,630
And with paper punch and washer head screw, you don't have any problem? I would think water would also find its way.
Oops, I forgot something :doh: ...I trim a little over 1/4 inch off each side of my sign and center it in the laminating pouch before laminating it. This gives me an area along each side which can be punched through without any risk of water getting to the printed part.
Really, you would only have to trim along the top and bottom edge. If you trim your sign down to 10 1/4" you will have over 1/2 an inch at the top and bottom to punch through.