Replacing Delta Cart wheels

[medicinalfunk]

I've had a Delta 10 cart for awhile and desperately need new wheels for it, but as you all know, they've been out of business for a few years now. My understanding is that the wheels Zuca uses don't fit, and the only wheels I can find that were made for a Delta on ebay are priced at 100 bucks a pop.

Anyone here have any suggestions? Replacing the axle to fit Zuca tires is a possibility, from what I've read, but I didn't know if there was any other way or any other type of wheel I don't know about, maybe from a ball golf setup, that would work.

 

[medicinalfunk]

Bump, anyone?

 

[ray1970]

Not familiar with that cart. Since you have one and I don't can you tell me what size the axle is?

 

[da Crippler]

Just get a piece of 1/2" threaded rod two feet long, 2 half inch lock nuts, a few regular 1/2" nuts, and 2 Zuca wheels. You may have to trim the threaded rod with a hacksaw as I don't know the width.

 

[jakebake91]

I gotta imagine you can find "cart" wheels pretty much anywhere, and just modify the axel accordingly. Shouldn't take too much mechanical ability.

Something like this:
https://www.mcmaster.com/product/29635T31

Fits a 1/2 axel.